add wifi transmission

Arduino/Arduino.ino

@@ -1,95 +0,0 @@
-#include <SoftwareSerial.h>
-#include "SIM800L.h"
-
-#define SIM800_RX_PIN 10
-#define SIM800_TX_PIN 11
-#define SIM800_RST_PIN 7
-
-SIM800L* sim800l;
-
-const char APN[] = "TM";
-String BASE_URL = "http://2.238.194.8/index.php?";
-//String BASE_URL = "https://postman-echo.com/get?";
-
-String s = "";
-char URL[100];
-
-
-int anemometerPin = 6;
-int anemometerVal = 0;
-int anemometerState = 0;
-unsigned long anemometerDuration = 0;
-unsigned long startime = 0;
-unsigned long timer = 0;
-int windSpeed = 0;
-
-int northPin = 4;
-int eastPin = 5;
-int southPin = 2;
-int westPin = 3;
-
-int timerLimit = 3000;//300000; // 5 minutes
-
-bool printSensorsData = true;
-
-String windDirection = "";
-
-
-
-void setup() {
-  // Initialize Serial Monitor for debugging
-  Serial.begin(115200);
-  while(!Serial);
-
-  // Initialize a SoftwareSerial
-  SoftwareSerial* serial = new SoftwareSerial(SIM800_RX_PIN, SIM800_TX_PIN);
-  serial->begin(9600);
-  delay(1000);
-
-  // Initialize SIM800L driver with an internal buffer of 200 bytes and a reception buffer of 512 bytes, debug disabled
-  sim800l = new SIM800L((Stream *)serial, SIM800_RST_PIN, 200, 512);
-
-  // Setup module for GPRS communication
-  setupModule();
-}
-
-void loop() {
-
-  windDirection = "";
-  anemometerVal = digitalRead(anemometerPin);
-  
-  if ((anemometerState == 1) && (anemometerVal == 0)) {
-    anemometerDuration = millis() - startime;
-    startime = millis();
-    windSpeed = 2500.0/anemometerDuration;
-  }
-  
-  anemometerState = anemometerVal;
-
-  if(millis() >= timer) {
-    
-    Serial.println("--------------------------");
-    Serial.println("Sending...");
-    
-    timer = millis() + timerLimit;
-    
-    if(digitalRead(northPin)) {windDirection = windDirection + "N";}
-    if(digitalRead(southPin)) {windDirection = windDirection + "S";}
-    if(digitalRead(eastPin)) {windDirection = windDirection + "E";}
-    if(digitalRead(westPin)) {windDirection = windDirection + "W";}
-
-    if(printSensorsData) {
-      Serial.print("Wind speed:\t");
-      Serial.print(windSpeed);
-      Serial.println("Km/h");
-    
-      Serial.print("Wind direction:\t");
-      Serial.println(windDirection);
-
-    }
-
-    sendRequest();
-    
-  }
-
-}

Arduino/GetData.ino

@@ -1,43 +0,0 @@
-
-void getWind() {
-
-  windDirection = "";
-  anemometerVal = digitalRead(anemometerPin);
-
-  //Serial.println(anemometerVal);
-  
-  if ((anemometerState == 1) && (anemometerVal == 0)) {
-    anemometerDuration = millis() - startime;
-    startime = millis();
-    windSpeed = 2500.0/anemometerDuration;
-  }
-  
-  anemometerState = anemometerVal;
-
-  if(millis() >= timer) {
-    
-    Serial.println("--------------------------");
-    
-    timer = millis() + timerLimit;
-    
-    if(digitalRead(northPin)) {windDirection = windDirection + "N";}
-    if(digitalRead(southPin)) {windDirection = windDirection + "S";}
-    if(digitalRead(eastPin)) {windDirection = windDirection + "E";}
-    if(digitalRead(westPin)) {windDirection = windDirection + "W";}
-
-    if(printSensorsData) {
-      Serial.print("Wind speed:\t");
-      Serial.print(windSpeed);
-      Serial.println("Km/h");
-    
-      Serial.print("Wind direction:\t");
-      Serial.println(windDirection);
-
-    }
-
-    sendRequest();
-    //delay(5000);
-    
-  }
-
-}

Arduino/Sensors/GetSensor.ino

@@ -0,0 +1,14 @@
+void getBME280Data() {
+
+   float temp(NAN), hum(NAN), pres(NAN);
+
+   BME280::TempUnit tempUnit(BME280::TempUnit_Celsius);
+   BME280::PresUnit presUnit(BME280::PresUnit_Pa);
+
+   bme.read(pres, temp, hum, tempUnit, presUnit);
+
+   temperature = temp;
+   humidity = hum;
+   pressure = pres;
+
+}

Arduino/Sensors/GetWind.ino

@@ -0,0 +1,35 @@
+
+void getWind() {
+
+  int index = 0;
+
+  digitalWrite(ENABLE_PIN1, HIGH);
+  digitalWrite(ENABLE_PIN2, LOW);
+  delay(10);
+  if(sensor.write(codes, sizeof(codes)) == 8) {
+    digitalWrite(ENABLE_PIN1, LOW);
+    for (byte i = 0; i < 11; i++) {
+      values[index][i] = sensor.read();
+    }
+  }
+  windSpeed = values[index][4];
+
+  delay(500);
+
+  index = 1;
+
+  digitalWrite(ENABLE_PIN1, LOW);
+  digitalWrite(ENABLE_PIN2, HIGH);
+  delay(10);
+  if(sensor.write(codes, sizeof(codes)) == 8) {
+    digitalWrite(ENABLE_PIN2, LOW);
+    for (byte i = 0; i < 11; i++) {
+      values[index][i] = sensor.read();
+    }
+  }
+  windDirection = values[index][4];
+
+  digitalWrite(ENABLE_PIN1, LOW);
+  digitalWrite(ENABLE_PIN2, LOW);
+  
+}

Arduino/Sensors/SendData.ino

@@ -0,0 +1,30 @@
+
+void sendData() {
+
+  if((WiFiMulti.run() == WL_CONNECTED)) {
+
+    WiFiClient client;
+    HTTPClient http;
+
+    char apiString[100] = "";
+    sprintf_P(apiString, server, windDirection, windSpeed, temperature, humidity, pressure);
+
+    Serial.print("[HTTP] begin...\n");
+    if (http.begin(client, apiString)) {
+      Serial.print("[HTTP] GET...\n");
+      int httpCode = http.GET();
+      if (httpCode > 0) {
+        Serial.printf("[HTTP] GET... code: %d\n", httpCode);
+        if (httpCode == HTTP_CODE_OK || httpCode == HTTP_CODE_MOVED_PERMANENTLY) {
+          String payload = http.getString();
+          Serial.println(payload);
+        }
+      } else {
+        Serial.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
+      }
+      http.end();
+    } else {
+      Serial.printf("[HTTP} Unable to connect\n");
+    }
+  }
+}

Arduino/Sensors/Sensors.ino

@@ -0,0 +1,82 @@
+
+#include <SoftwareSerial.h>
+#include <Wire.h>
+#include <BME280I2C.h>
+
+#include <ESP8266WiFi.h>
+#include <ESP8266WiFiMulti.h>
+#include <ESP8266HTTPClient.h>
+#include <WiFiClient.h>
+
+#define ENABLE_PIN1 D5 // 8 // dir
+#define ENABLE_PIN2 D6 // 9 // speed
+#define SERIAL_RO D7 // 10
+#define SERIAL_DI D8 // 11
+
+#define WIFIUSR "NETGEAR41"
+#define WIFIPWD "magicalbanana0"
+
+ESP8266WiFiMulti WiFiMulti;
+BME280I2C bme;
+
+const byte codes[] = {0x01 ,0x03 ,0x00 ,0x00 ,0x00 ,0x02 ,0xC4 ,0x0B};
+const char server[] PROGMEM = "http://2.233.91.82/weather/api/station?data=%d|%d|%f|%f|%f";
+    
+byte values[2][20];
+SoftwareSerial sensor(SERIAL_RO, SERIAL_DI);
+
+int windSpeed = 0;
+int windDirection = 0;
+
+float temperature = 0;
+float humidity = 0;
+float pressure = 0;
+
+void setup() {
+  // Initialize Serial Monitor for debugging
+  Serial.begin(9600);
+  while(!Serial);
+
+  // Initialize a Wire
+  Wire.begin();
+   while(!bme.begin()){
+    Serial.println("Could not find BME280 sensor!");
+    delay(1000);
+  }
+
+  // Initialize a SoftwareSerial
+  sensor.begin(4800);
+  delay(500);
+  pinMode(ENABLE_PIN1, OUTPUT);
+  pinMode(ENABLE_PIN2, OUTPUT);
+
+  // Initialize WiFi
+  for (uint8_t t = 4; t > 0; t--) {
+    Serial.printf("[SETUP] WAIT %d...\n", t);
+    Serial.flush();
+    delay(1000);
+  }
+
+  WiFi.mode(WIFI_STA);
+  WiFiMulti.addAP(WIFIUSR, WIFIPWD);
+}
+
+void loop() {
+  
+  getWind();
+  Serial.print("Direction: ");
+  Serial.println(windDirection);
+  Serial.print("Speed: ");
+  Serial.println(windSpeed);
+
+  getBME280Data();
+  Serial.print("Temp: ");
+  Serial.println(temperature);
+  Serial.print("Hum: ");
+  Serial.println(humidity);
+  Serial.print("Pres: ");
+  Serial.println(pressure);
+
+  sendData();
+  delay(10000);
+}

Arduino/Sensors/Setup.ino

@@ -0,0 +1,20 @@
+
+void setupBME280() {
+  Wire.begin();
+
+  while(!bme.begin()) {
+    Serial.println("Could not find BME280 sensor!");
+    delay(1000);
+  }
+
+  switch(bme.chipModel()) {
+     case BME280::ChipModel_BME280:
+       Serial.println("Found BME280 sensor! Success.");
+       break;
+     case BME280::ChipModel_BMP280:
+       Serial.println("Found BMP280 sensor! No Humidity available.");
+       break;
+     default:
+       Serial.println("Found UNKNOWN sensor! Error!");
+  }
+}

Arduino/Transmission/GetSensor.ino

@@ -0,0 +1,14 @@
+void getBME280Data() {
+
+   float temp(NAN), hum(NAN), pres(NAN);
+
+   BME280::TempUnit tempUnit(BME280::TempUnit_Celsius);
+   BME280::PresUnit presUnit(BME280::PresUnit_Pa);
+
+   bme.read(pres, temp, hum, tempUnit, presUnit);
+
+   temperature = temp;
+   humidity = hum;
+   pressure = pres;
+
+}

Arduino/Transmission/GetWid.ino

@@ -0,0 +1,7 @@
+
+void getWind() {
+
+  windDirection = 0;
+  windSpeed = 0;
+
+}

Arduino/Request.ino → Arduino/Transmission/Request.ino

@@ -1,11 +1,19 @@
 
 void sendRequest() {
 
+  getBME280Data();
+    
   s = BASE_URL;
-  s.concat("windSpeed=");
+  s.concat("windS=");
   s.concat(windSpeed);
-  s.concat("&windDirection=");
+  s.concat("&windD=");
   s.concat(windDirection);
+  s.concat("&temp=");
+  s.concat(temperature);
+  s.concat("&pres=");
+  s.concat(pressure);
+  s.concat("&hum=");
+  s.concat(humidity);
   s.toCharArray(URL, 100);
 
   Serial.println(URL);
@@ -24,7 +32,7 @@ void sendRequest() {
     Serial.println(F("GPRS not connected !"));
     Serial.println(F("Reset the module."));
     sim800l->reset();
-    setupModule();
+    setupSIM800L();
     return;
   }
 
@@ -67,6 +75,6 @@ void sendRequest() {
     Serial.println(F("Failed to switch module to low power mode"));
   }
 
-  
+  timer = millis() + timerLimit;
   windSpeed = 0;
 }

Arduino/Setup.ino → Arduino/Transmission/Setup.ino

@@ -1,6 +1,6 @@
 
-void setupModule() {
-    // Wait until the module is ready to accept AT commands
+void setupSIM800L() {
+  // Wait until the module is ready to accept AT commands
   while(!sim800l->isReady()) {
     Serial.println(F("Problem to initialize AT command, retry in 1 sec"));
     delay(1000);
@@ -35,3 +35,24 @@ void setupModule() {
   }
   Serial.println(F("GPRS config OK"));
 }
+
+
+void setupBME280() {
+  Wire.begin();
+
+  while(!bme.begin()) {
+    Serial.println("Could not find BME280 sensor!");
+    delay(1000);
+  }
+
+  switch(bme.chipModel()) {
+     case BME280::ChipModel_BME280:
+       Serial.println("Found BME280 sensor! Success.");
+       break;
+     case BME280::ChipModel_BMP280:
+       Serial.println("Found BMP280 sensor! No Humidity available.");
+       break;
+     default:
+       Serial.println("Found UNKNOWN sensor! Error!");
+  }
+}

Arduino/Transmission/Transmission.ino

@@ -0,0 +1,56 @@
+#include <SoftwareSerial.h>
+#include <Wire.h>
+#include "SIM800L.h"
+#include <BME280I2C.h>
+
+#define SIM800_RX_PIN 10
+#define SIM800_TX_PIN 11
+#define SIM800_RST_PIN 7
+
+SIM800L* sim800l;
+BME280I2C bme;
+
+
+const char APN[] = "TM";
+String BASE_URL = "http://2.238.194.8/index.php?";
+//String BASE_URL = "https://postman-echo.com/get?";
+
+String s = "";
+char URL[100];
+
+int windSpeed = 0;
+int windDirection = 0;
+
+float temperature = 0;
+float humidity = 0;
+float pressure = 0;
+
+bool printSensorsData = true;
+
+void setup() {
+  // Initialize Serial Monitor for debugging
+  Serial.begin(9600);
+  while(!Serial);
+
+ pinMode(13, OUTPUT);
+ digitalWrite(13, HIGH);
+
+  // Initialize a SoftwareSerial
+  SoftwareSerial* serial = new SoftwareSerial(SIM800_RX_PIN, SIM800_TX_PIN);
+  serial->begin(9600);
+  delay(1000);
+
+  // Initialize SIM800L driver with an internal buffer of 200 bytes and a reception buffer of 512 bytes, debug disabled
+  sim800l = new SIM800L((Stream *)serial, SIM800_RST_PIN, 200, 512);
+
+  // Setup modules
+  setupSIM800L();
+  setupBME280();
+  timer = millis() + timerLimit;
+}
+
+void loop() {
+ 
+  getWind();
+
+}

Circuits/GRB/SensorsPCB_contour.gm1

@@ -0,0 +1,26 @@
+G04 MADE WITH FRITZING*
+G04 WWW.FRITZING.ORG*
+G04 DOUBLE SIDED*
+G04 HOLES PLATED*
+G04 CONTOUR ON CENTER OF CONTOUR VECTOR*
+%ASAXBY*%
+%FSLAX23Y23*%
+%MOIN*%
+%OFA0B0*%
+%SFA1.0B1.0*%
+%ADD10R,3.333330X2.222220*%
+%ADD11C,0.008000*%
+%ADD10C,0.008*%
+%LNCONTOUR*%
+G90*
+G70*
+G54D10*
+G54D11*
+X4Y2218D02*
+X3329Y2218D01*
+X3329Y4D01*
+X4Y4D01*
+X4Y2218D01*
+D02*
+G04 End of contour*
+M02*

Circuits/GRB/SensorsPCB_copperBottom.gbl

@@ -0,0 +1,390 @@
+G04 MADE WITH FRITZING*
+G04 WWW.FRITZING.ORG*
+G04 DOUBLE SIDED*
+G04 HOLES PLATED*
+G04 CONTOUR ON CENTER OF CONTOUR VECTOR*
+%ASAXBY*%
+%FSLAX23Y23*%
+%MOIN*%
+%OFA0B0*%
+%SFA1.0B1.0*%
+%ADD10C,0.080000*%
+%ADD11C,0.065278*%
+%ADD12C,0.078000*%
+%ADD13C,0.075000*%
+%ADD14R,0.080000X0.080000*%
+%ADD15R,0.075000X0.075000*%
+%ADD16C,0.090000*%
+%ADD17C,0.048000*%
+%ADD18C,0.070000*%
+%LNCOPPER0*%
+G90*
+G70*
+G54D10*
+X287Y2006D03*
+X287Y1806D03*
+X287Y1606D03*
+X287Y1406D03*
+X287Y1206D03*
+X287Y1006D03*
+X287Y806D03*
+X287Y606D03*
+X287Y406D03*
+X287Y206D03*
+X3043Y914D03*
+X3043Y1114D03*
+X3043Y1314D03*
+X3043Y714D03*
+G54D11*
+X2628Y152D03*
+X2728Y152D03*
+X2828Y152D03*
+X2928Y152D03*
+X3028Y152D03*
+X2168Y2052D03*
+X2068Y2052D03*
+X1968Y2052D03*
+X1868Y2052D03*
+X1768Y2052D03*
+X1668Y2052D03*
+X1568Y2052D03*
+X1468Y2052D03*
+X1368Y2052D03*
+X1268Y2052D03*
+X3028Y2052D03*
+X2928Y2052D03*
+X2828Y2052D03*
+X2728Y2052D03*
+X2628Y2052D03*
+X2528Y2052D03*
+X2428Y2052D03*
+X2328Y2052D03*
+X1728Y152D03*
+X1628Y152D03*
+X1828Y152D03*
+X1928Y152D03*
+X2028Y152D03*
+X2128Y152D03*
+X2228Y152D03*
+X2328Y152D03*
+X2528Y152D03*
+G54D12*
+X926Y1757D03*
+X926Y1657D03*
+X926Y1557D03*
+X926Y1457D03*
+X951Y772D03*
+X951Y672D03*
+X951Y572D03*
+X951Y472D03*
+X2550Y772D03*
+X2550Y672D03*
+X2550Y572D03*
+X2550Y472D03*
+X2525Y1757D03*
+X2525Y1657D03*
+X2525Y1557D03*
+X2525Y1457D03*
+X1271Y625D03*
+X1271Y280D03*
+X1566Y1707D03*
+X1566Y1412D03*
+X2403Y871D03*
+X2304Y428D03*
+X2403Y1363D03*
+X730Y428D03*
+X730Y821D03*
+X730Y1412D03*
+X730Y1806D03*
+X1123Y625D03*
+X1714Y1560D03*
+X2206Y1363D03*
+X2304Y1363D03*
+G54D13*
+X1566Y964D03*
+X1566Y1264D03*
+X1666Y964D03*
+X1666Y1264D03*
+X1766Y964D03*
+X1766Y1264D03*
+X1866Y964D03*
+X1866Y1264D03*
+X1966Y964D03*
+X1966Y1264D03*
+G54D14*
+X287Y2006D03*
+X3043Y714D03*
+G54D15*
+X1566Y964D03*
+G54D10*
+X2846Y329D02*
+X2910Y190D01*
+D02*
+X2846Y1312D02*
+X2846Y329D01*
+D02*
+X3000Y1313D02*
+X2846Y1312D01*
+D02*
+X335Y674D02*
+X910Y672D01*
+D02*
+X311Y640D02*
+X335Y674D01*
+G54D16*
+D02*
+X2206Y279D02*
+X1862Y624D01*
+D02*
+X1322Y626D02*
+X1320Y773D01*
+D02*
+X1862Y624D02*
+X1322Y626D01*
+D02*
+X2206Y182D02*
+X2206Y279D01*
+D02*
+X1322Y1462D02*
+X1074Y1759D01*
+D02*
+X2203Y186D02*
+X2206Y182D01*
+D02*
+X1320Y773D02*
+X1322Y1462D01*
+D02*
+X1074Y1759D02*
+X968Y1757D01*
+D02*
+X1320Y773D02*
+X993Y772D01*
+G54D17*
+D02*
+X1366Y535D02*
+X1271Y478D01*
+D02*
+X1271Y478D02*
+X1122Y478D01*
+D02*
+X1766Y527D02*
+X1366Y535D01*
+D02*
+X2009Y182D02*
+X2010Y279D01*
+D02*
+X1024Y478D02*
+X993Y476D01*
+D02*
+X1122Y478D02*
+X1024Y478D01*
+D02*
+X2010Y279D02*
+X1766Y527D01*
+D02*
+X2005Y188D02*
+X2009Y182D01*
+D02*
+X1122Y478D02*
+X1123Y583D01*
+G54D18*
+D02*
+X910Y573D02*
+X729Y577D01*
+D02*
+X729Y577D02*
+X729Y469D01*
+G54D16*
+D02*
+X335Y823D02*
+X326Y820D01*
+D02*
+X688Y822D02*
+X335Y823D01*
+G54D10*
+D02*
+X688Y1411D02*
+X329Y1406D01*
+G54D18*
+D02*
+X731Y1657D02*
+X730Y1765D01*
+D02*
+X885Y1657D02*
+X731Y1657D01*
+G54D10*
+D02*
+X336Y1560D02*
+X318Y1577D01*
+D02*
+X885Y1557D02*
+X336Y1560D01*
+G54D16*
+D02*
+X975Y1068D02*
+X778Y1214D01*
+D02*
+X975Y822D02*
+X975Y1068D01*
+D02*
+X969Y810D02*
+X975Y822D01*
+D02*
+X778Y1214D02*
+X329Y1206D01*
+G54D17*
+D02*
+X2525Y1598D02*
+X2525Y1615D01*
+D02*
+X2550Y614D02*
+X2550Y631D01*
+D02*
+X1959Y722D02*
+X2108Y577D01*
+D02*
+X1663Y723D02*
+X1959Y722D01*
+D02*
+X2403Y577D02*
+X2517Y496D01*
+D02*
+X2108Y577D02*
+X2403Y577D01*
+D02*
+X1666Y925D02*
+X1663Y723D01*
+D02*
+X2305Y1659D02*
+X2305Y1904D01*
+D02*
+X2305Y1904D02*
+X2197Y2021D01*
+D02*
+X2304Y1404D02*
+X2305Y1659D01*
+D02*
+X1961Y1167D02*
+X1664Y1165D01*
+D02*
+X1960Y1117D02*
+X1961Y1167D01*
+D02*
+X1664Y1165D02*
+X1665Y1225D01*
+D02*
+X2550Y1116D02*
+X1960Y1117D01*
+D02*
+X2550Y814D02*
+X2550Y1116D01*
+D02*
+X2206Y1904D02*
+X2206Y1659D01*
+D02*
+X2206Y1659D02*
+X2206Y1404D01*
+D02*
+X2097Y2021D02*
+X2206Y1904D01*
+D02*
+X1862Y1067D02*
+X1864Y1004D01*
+D02*
+X1469Y1560D02*
+X1469Y1067D01*
+D02*
+X1469Y1067D02*
+X1862Y1067D01*
+D02*
+X1673Y1560D02*
+X1469Y1560D01*
+D02*
+X2402Y1019D02*
+X1960Y1019D01*
+D02*
+X1960Y1019D02*
+X1962Y1004D01*
+D02*
+X2403Y912D02*
+X2402Y1019D01*
+D02*
+X2353Y2018D02*
+X2402Y1953D01*
+D02*
+X2402Y1659D02*
+X2403Y1404D01*
+D02*
+X2402Y1953D02*
+X2402Y1659D01*
+D02*
+X2402Y1659D02*
+X2484Y1657D01*
+D02*
+X2107Y1708D02*
+X2107Y1904D01*
+D02*
+X2107Y1904D02*
+X1997Y2021D01*
+D02*
+X1607Y1707D02*
+X2107Y1708D01*
+D02*
+X1764Y1413D02*
+X1607Y1412D01*
+D02*
+X1766Y1304D02*
+X1764Y1413D01*
+D02*
+X1960Y1461D02*
+X1862Y1461D01*
+D02*
+X2157Y1216D02*
+X1960Y1461D01*
+D02*
+X1862Y1461D02*
+X1865Y1304D01*
+D02*
+X2699Y1756D02*
+X2699Y1213D01*
+D02*
+X2699Y1213D02*
+X2157Y1216D01*
+D02*
+X2567Y1756D02*
+X2699Y1756D01*
+G54D16*
+D02*
+X928Y2002D02*
+X336Y2003D01*
+D02*
+X927Y1798D02*
+X928Y2002D01*
+D02*
+X1322Y626D02*
+X1312Y625D01*
+D02*
+X532Y282D02*
+X1207Y280D01*
+D02*
+X532Y428D02*
+X532Y282D01*
+D02*
+X335Y428D02*
+X532Y428D01*
+D02*
+X325Y424D02*
+X335Y428D01*
+G54D17*
+D02*
+X2304Y182D02*
+X2304Y387D01*
+D02*
+X2302Y185D02*
+X2304Y182D01*
+G54D16*
+D02*
+X336Y2003D02*
+X329Y2004D01*
+G04 End of Copper0*
+M02*

Circuits/GRB/SensorsPCB_copperTop.gtl

@@ -0,0 +1,273 @@
+G04 MADE WITH FRITZING*
+G04 WWW.FRITZING.ORG*
+G04 DOUBLE SIDED*
+G04 HOLES PLATED*
+G04 CONTOUR ON CENTER OF CONTOUR VECTOR*
+%ASAXBY*%
+%FSLAX23Y23*%
+%MOIN*%
+%OFA0B0*%
+%SFA1.0B1.0*%
+%ADD10C,0.080000*%
+%ADD11C,0.065278*%
+%ADD12C,0.078000*%
+%ADD13C,0.075000*%
+%ADD14R,0.080000X0.080000*%
+%ADD15R,0.075000X0.075000*%
+%ADD16C,0.070000*%
+%ADD17C,0.090000*%
+%ADD18C,0.048000*%
+%LNCOPPER1*%
+G90*
+G70*
+G54D10*
+X287Y2006D03*
+X287Y1806D03*
+X287Y1606D03*
+X287Y1406D03*
+X287Y1206D03*
+X287Y1006D03*
+X287Y806D03*
+X287Y606D03*
+X287Y406D03*
+X287Y206D03*
+X3043Y914D03*
+X3043Y1114D03*
+X3043Y1314D03*
+X3043Y714D03*
+G54D11*
+X2628Y152D03*
+X2728Y152D03*
+X2828Y152D03*
+X2928Y152D03*
+X3028Y152D03*
+X2168Y2052D03*
+X2068Y2052D03*
+X1968Y2052D03*
+X1868Y2052D03*
+X1768Y2052D03*
+X1668Y2052D03*
+X1568Y2052D03*
+X1468Y2052D03*
+X1368Y2052D03*
+X1268Y2052D03*
+X3028Y2052D03*
+X2928Y2052D03*
+X2828Y2052D03*
+X2728Y2052D03*
+X2628Y2052D03*
+X2528Y2052D03*
+X2428Y2052D03*
+X2328Y2052D03*
+X1728Y152D03*
+X1628Y152D03*
+X1828Y152D03*
+X1928Y152D03*
+X2028Y152D03*
+X2128Y152D03*
+X2228Y152D03*
+X2328Y152D03*
+X2528Y152D03*
+G54D12*
+X926Y1757D03*
+X926Y1657D03*
+X926Y1557D03*
+X926Y1457D03*
+X951Y772D03*
+X951Y672D03*
+X951Y572D03*
+X951Y472D03*
+X2550Y772D03*
+X2550Y672D03*
+X2550Y572D03*
+X2550Y472D03*
+X2525Y1757D03*
+X2525Y1657D03*
+X2525Y1557D03*
+X2525Y1457D03*
+X1271Y625D03*
+X1271Y280D03*
+X1566Y1707D03*
+X1566Y1412D03*
+X2403Y871D03*
+X2304Y428D03*
+X2403Y1363D03*
+X730Y428D03*
+X730Y821D03*
+X730Y1412D03*
+X730Y1806D03*
+X1123Y625D03*
+X1714Y1560D03*
+X2206Y1363D03*
+X2304Y1363D03*
+G54D13*
+X1566Y964D03*
+X1566Y1264D03*
+X1666Y964D03*
+X1666Y1264D03*
+X1766Y964D03*
+X1766Y1264D03*
+X1866Y964D03*
+X1866Y1264D03*
+X1966Y964D03*
+X1966Y1264D03*
+G54D14*
+X287Y2006D03*
+X3043Y714D03*
+G54D15*
+X1566Y964D03*
+G54D16*
+X1911Y181D02*
+X1907Y189D01*
+G54D10*
+D02*
+X2796Y920D02*
+X3000Y915D01*
+D02*
+X2796Y1902D02*
+X2796Y920D01*
+D02*
+X1565Y1904D02*
+X2796Y1902D01*
+D02*
+X1567Y2009D02*
+X1565Y1904D01*
+G54D16*
+D02*
+X2699Y722D02*
+X2699Y327D01*
+D02*
+X2404Y279D02*
+X1911Y279D01*
+D02*
+X1911Y279D02*
+X1911Y181D01*
+D02*
+X2451Y327D02*
+X2404Y279D01*
+D02*
+X2699Y327D02*
+X2451Y327D01*
+D02*
+X3000Y715D02*
+X2699Y722D01*
+G54D10*
+D02*
+X3190Y1118D02*
+X3085Y1115D01*
+D02*
+X3190Y327D02*
+X3190Y1118D01*
+D02*
+X3057Y183D02*
+X3190Y327D01*
+G54D17*
+D02*
+X1416Y135D02*
+X1418Y428D01*
+D02*
+X1418Y428D02*
+X2241Y428D01*
+D02*
+X580Y135D02*
+X1416Y135D01*
+D02*
+X485Y183D02*
+X580Y135D01*
+D02*
+X335Y183D02*
+X330Y185D01*
+D02*
+X485Y183D02*
+X335Y183D01*
+D02*
+X485Y1020D02*
+X485Y183D01*
+D02*
+X485Y1020D02*
+X483Y1806D01*
+D02*
+X483Y1806D02*
+X334Y1806D01*
+D02*
+X335Y1020D02*
+X485Y1020D01*
+D02*
+X332Y1020D02*
+X335Y1020D01*
+G54D18*
+D02*
+X1762Y820D02*
+X2206Y820D01*
+D02*
+X2206Y820D02*
+X2206Y1322D01*
+D02*
+X1765Y925D02*
+X1762Y820D01*
+D02*
+X2303Y674D02*
+X2304Y1322D01*
+D02*
+X2303Y674D02*
+X1518Y674D01*
+D02*
+X1518Y921D02*
+X1537Y938D01*
+D02*
+X1518Y674D02*
+X1518Y921D01*
+D02*
+X2509Y673D02*
+X2303Y674D01*
+G54D16*
+D02*
+X1123Y1216D02*
+X1123Y666D01*
+D02*
+X952Y1425D02*
+X1123Y1216D01*
+G54D18*
+D02*
+X2352Y1559D02*
+X1755Y1560D01*
+D02*
+X2490Y1478D02*
+X2352Y1559D01*
+G54D16*
+D02*
+X730Y469D02*
+X730Y780D01*
+D02*
+X730Y1453D02*
+X730Y1765D01*
+G54D18*
+D02*
+X1271Y321D02*
+X1271Y583D01*
+D02*
+X1566Y1453D02*
+X1566Y1666D01*
+D02*
+X2403Y912D02*
+X2403Y1322D01*
+D02*
+X1567Y1116D02*
+X1960Y1116D01*
+D02*
+X1960Y1116D02*
+X1965Y1004D01*
+D02*
+X1566Y1225D02*
+X1567Y1116D01*
+D02*
+X2304Y1461D02*
+X1960Y1461D01*
+D02*
+X1960Y1461D02*
+X1965Y1293D01*
+D02*
+X2304Y1393D02*
+X2304Y1461D01*
+G04 End of Copper1*
+M02*

Circuits/GRB/SensorsPCB_drill.txt

@@ -0,0 +1,102 @@
+; NON-PLATED HOLES START AT T1
+; THROUGH (PLATED) HOLES START AT T100
+M48
+INCH
+T100C0.040000
+T101C0.038000
+T102C0.035000
+T103C0.040278
+%
+T100
+X002866Y004057
+X002866Y016057
+X030425Y011136
+X002866Y020057
+X002866Y008057
+X002866Y006057
+X002866Y014057
+X030425Y009136
+X002866Y010057
+X030425Y007136
+X002866Y018057
+X002866Y002057
+X030425Y013136
+X002866Y012057
+T101
+X007295Y014120
+X025504Y004722
+X025253Y015565
+X025253Y016565
+X025504Y006722
+X025504Y005722
+X023043Y004277
+X009514Y007722
+X022059Y013628
+X012708Y002801
+X023043Y013628
+X025253Y017565
+X025504Y007722
+X009514Y006722
+X011232Y006246
+X025253Y014565
+X009263Y017565
+X009263Y016565
+X009263Y014565
+X009263Y015565
+X012708Y006246
+X017137Y015596
+X007295Y018057
+X007295Y008214
+X015661Y014120
+X024027Y013628
+X009514Y005722
+X007295Y004277
+X024027Y008707
+X009514Y004722
+X015661Y017073
+T102
+X019661Y009644
+X016661Y009644
+X015661Y012644
+X017661Y009644
+X019661Y012644
+X018661Y012644
+X017661Y012644
+X015661Y009644
+X018661Y009644
+X016661Y012644
+T103
+X016677Y020518
+X023277Y001518
+X016277Y001518
+X024277Y020518
+X013677Y020518
+X021277Y001518
+X030277Y001518
+X029277Y001518
+X029277Y020518
+X023277Y020518
+X015677Y020518
+X025277Y020518
+X014677Y020518
+X020277Y001518
+X012677Y020518
+X017277Y001518
+X030277Y020518
+X018277Y001518
+X028277Y001518
+X022277Y001518
+X026277Y001518
+X019277Y001518
+X026277Y020518
+X021677Y020518
+X017677Y020518
+X027277Y020518
+X028277Y020518
+X019677Y020518
+X027277Y001518
+X025277Y001518
+X020677Y020518
+X018677Y020518
+T00
+M30

Circuits/GRB/SensorsPCB_maskBottom.gbs

@@ -0,0 +1,117 @@
+G04 MADE WITH FRITZING*
+G04 WWW.FRITZING.ORG*
+G04 DOUBLE SIDED*
+G04 HOLES PLATED*
+G04 CONTOUR ON CENTER OF CONTOUR VECTOR*
+%ASAXBY*%
+%FSLAX23Y23*%
+%MOIN*%
+%OFA0B0*%
+%SFA1.0B1.0*%
+%ADD10C,0.090000*%
+%ADD11C,0.075278*%
+%ADD12C,0.088000*%
+%ADD13C,0.085000*%
+%ADD14R,0.090000X0.090000*%
+%ADD15R,0.085000X0.085000*%
+%LNMASK0*%
+G90*
+G70*
+G54D10*
+X287Y2006D03*
+X287Y1806D03*
+X287Y1606D03*
+X287Y1406D03*
+X287Y1206D03*
+X287Y1006D03*
+X287Y806D03*
+X287Y606D03*
+X287Y406D03*
+X287Y206D03*
+X3043Y914D03*
+X3043Y1114D03*
+X3043Y1314D03*
+X3043Y714D03*
+G54D11*
+X2628Y152D03*
+X2728Y152D03*
+X2828Y152D03*
+X2928Y152D03*
+X3028Y152D03*
+X2168Y2052D03*
+X2068Y2052D03*
+X1968Y2052D03*
+X1868Y2052D03*
+X1768Y2052D03*
+X1668Y2052D03*
+X1568Y2052D03*
+X1468Y2052D03*
+X1368Y2052D03*
+X1268Y2052D03*
+X3028Y2052D03*
+X2928Y2052D03*
+X2828Y2052D03*
+X2728Y2052D03*
+X2628Y2052D03*
+X2528Y2052D03*
+X2428Y2052D03*
+X2328Y2052D03*
+X1728Y152D03*
+X1628Y152D03*
+X1828Y152D03*
+X1928Y152D03*
+X2028Y152D03*
+X2128Y152D03*
+X2228Y152D03*
+X2328Y152D03*
+X2528Y152D03*
+G54D12*
+X926Y1757D03*
+X926Y1657D03*
+X926Y1557D03*
+X926Y1457D03*
+X951Y772D03*
+X951Y672D03*
+X951Y572D03*
+X951Y472D03*
+X2550Y772D03*
+X2550Y672D03*
+X2550Y572D03*
+X2550Y472D03*
+X2525Y1757D03*
+X2525Y1657D03*
+X2525Y1557D03*
+X2525Y1457D03*
+X1271Y625D03*
+X1271Y280D03*
+X1566Y1707D03*
+X1566Y1412D03*
+X2403Y871D03*
+X2304Y428D03*
+X2403Y1363D03*
+X730Y428D03*
+X730Y821D03*
+X730Y1412D03*
+X730Y1806D03*
+X1123Y625D03*
+X1714Y1560D03*
+X2206Y1363D03*
+X2304Y1363D03*
+G54D13*
+X1566Y964D03*
+X1566Y1264D03*
+X1666Y964D03*
+X1666Y1264D03*
+X1766Y964D03*
+X1766Y1264D03*
+X1866Y964D03*
+X1866Y1264D03*
+X1966Y964D03*
+X1966Y1264D03*
+G54D14*
+X287Y2006D03*
+X3043Y714D03*
+G54D15*
+X1566Y964D03*
+G04 End of Mask0*
+M02*

Circuits/GRB/SensorsPCB_maskTop.gts

@@ -0,0 +1,117 @@
+G04 MADE WITH FRITZING*
+G04 WWW.FRITZING.ORG*
+G04 DOUBLE SIDED*
+G04 HOLES PLATED*
+G04 CONTOUR ON CENTER OF CONTOUR VECTOR*
+%ASAXBY*%
+%FSLAX23Y23*%
+%MOIN*%
+%OFA0B0*%
+%SFA1.0B1.0*%
+%ADD10C,0.090000*%
+%ADD11C,0.075278*%
+%ADD12C,0.088000*%
+%ADD13C,0.085000*%
+%ADD14R,0.090000X0.090000*%
+%ADD15R,0.085000X0.085000*%
+%LNMASK1*%
+G90*
+G70*
+G54D10*
+X287Y2006D03*
+X287Y1806D03*
+X287Y1606D03*
+X287Y1406D03*
+X287Y1206D03*
+X287Y1006D03*
+X287Y806D03*
+X287Y606D03*
+X287Y406D03*
+X287Y206D03*
+X3043Y914D03*
+X3043Y1114D03*
+X3043Y1314D03*
+X3043Y714D03*
+G54D11*
+X2628Y152D03*
+X2728Y152D03*
+X2828Y152D03*
+X2928Y152D03*
+X3028Y152D03*
+X2168Y2052D03*
+X2068Y2052D03*
+X1968Y2052D03*
+X1868Y2052D03*
+X1768Y2052D03*
+X1668Y2052D03*
+X1568Y2052D03*
+X1468Y2052D03*
+X1368Y2052D03*
+X1268Y2052D03*
+X3028Y2052D03*
+X2928Y2052D03*
+X2828Y2052D03*
+X2728Y2052D03*
+X2628Y2052D03*
+X2528Y2052D03*
+X2428Y2052D03*
+X2328Y2052D03*
+X1728Y152D03*
+X1628Y152D03*
+X1828Y152D03*
+X1928Y152D03*
+X2028Y152D03*
+X2128Y152D03*
+X2228Y152D03*
+X2328Y152D03*
+X2528Y152D03*
+G54D12*
+X926Y1757D03*
+X926Y1657D03*
+X926Y1557D03*
+X926Y1457D03*
+X951Y772D03*
+X951Y672D03*
+X951Y572D03*
+X951Y472D03*
+X2550Y772D03*
+X2550Y672D03*
+X2550Y572D03*
+X2550Y472D03*
+X2525Y1757D03*
+X2525Y1657D03*
+X2525Y1557D03*
+X2525Y1457D03*
+X1271Y625D03*
+X1271Y280D03*
+X1566Y1707D03*
+X1566Y1412D03*
+X2403Y871D03*
+X2304Y428D03*
+X2403Y1363D03*
+X730Y428D03*
+X730Y821D03*
+X730Y1412D03*
+X730Y1806D03*
+X1123Y625D03*
+X1714Y1560D03*
+X2206Y1363D03*
+X2304Y1363D03*
+G54D13*
+X1566Y964D03*
+X1566Y1264D03*
+X1666Y964D03*
+X1666Y1264D03*
+X1766Y964D03*
+X1766Y1264D03*
+X1866Y964D03*
+X1866Y1264D03*
+X1966Y964D03*
+X1966Y1264D03*
+G54D14*
+X287Y2006D03*
+X3043Y714D03*
+G54D15*
+X1566Y964D03*
+G04 End of Mask1*
+M02*

Circuits/GRB/SensorsPCB_pnp.txt

@@ -0,0 +1,43 @@
+*Pick And Place List
+*Company=
+*Author=
+*eMail=
+*
+*Project=SensorsPCB
+*Date=18:53:18
+*CreatedBy=Fritzing 0.9.3b.04.19.5c895d327c44a3114e5fcc9d8260daf0cbb52806
+*
+*
+*Coordinates in mm, always center of component
+*Origin 0/0=Lower left corner of PCB
+*Rotation in degree (0-360, math. pos.)
+*
+*No;Value;Package;X;Y;Rotation;Side;Name
+1;;THT;61.0302;-22.1159;0;Bottom;J24
+2;;THT;18.5301;-45.8659;0;Bottom;J9
+3;;;70.3817;-25.6133;-90;Bottom;TXT1
+4;;DIP (Dual Inline) [THT];44.8603;-28.3059;-90;Bottom;IC3
+5;;THT;23.5302;-40.8059;0;Bottom;J2
+6;;THT;18.5301;-35.8659;0;Bottom;J10
+7;;;44.6644;-28.7548;90;Bottom;IMG1
+8;;;47.6632;-27.9859;0;Bottom;Componente1
+9;;;14.5511;-25.9789;90;Bottom;TXT1
+10;;THT;61.0302;-34.6159;0;Bottom;J23
+11;;THT;39.7803;-43.3659;0;Bottom;J26
+12;;THT;32.2803;-15.8658;0;Bottom;J29
+13;;THT;58.5303;-34.6159;0;Bottom;J17
+14;;THT;58.5303;-10.866;0;Bottom;J30
+15;;THT;64.1432;-40.8059;0;Bottom;J3
+16;;THT;24.1672;-15.806;0;Bottom;J4
+17;;THT;73.6503;-25.7459;180;Bottom;J39
+18;;THT;10.9103;-28.0859;0;Bottom;J40
+19;;THT;56.0301;-34.6159;0;Bottom;J20
+20;;THT;18.5301;-20.8659;0;Bottom;J11
+21;;THT;43.5302;-39.6159;0;Bottom;J21
+22;;THT;32.2803;-7.1159;0;Bottom;J28
+23;;THT;39.7803;-35.8659;0;Bottom;J25
+24;;;11.3806;-27.8831;90;Bottom;TXT1
+25;;THT;64.7801;-15.806;0;Bottom;J5
+26;;THT;28.5304;-15.8658;0;Bottom;J8
+27;;THT;18.5301;-10.866;0;Bottom;J12
+28;;;74.4035;-26.2564;-90;Bottom;TXT1

TEST/windAll/windAll.ino

@@ -0,0 +1,56 @@
+#include <SoftwareSerial.h>
+#include <Wire.h>
+
+const int enable[] = {0,8,9};
+const byte codes[] = {0x01 ,0x03 ,0x00 ,0x00 ,0x00 ,0x02 ,0xC4 ,0x0B};
+ 
+byte values[3][20];
+SoftwareSerial sensor(10, 11); // RO / DI
+ 
+void setup() {
+  Serial.begin(4800);
+  while(!Serial){;}
+  sensor.begin(4800);
+  delay(500);
+  pinMode(enable[1], OUTPUT);
+  pinMode(enable[2], OUTPUT);
+}
+ 
+void loop() {
+  int val1 = 0 ; // SPEED
+  int val2 = 0 ; // DIR
+
+  
+  readSensor(1);
+  //val1 = ((values[1][5]*256)+values[1][6]);
+  val1 = values[1][4];
+  Serial.print("dir: ");
+  Serial.println(val1);
+
+  delay(1000);
+  
+  readSensor(2);
+  val2 = values[2][4];
+  Serial.print("speed: ");
+  Serial.println(val2);
+
+  delay(1000);
+
+  
+}
+ 
+byte readSensor(int index) {
+  digitalWrite(enable[index], HIGH);
+  delay(10);
+  if(sensor.write(codes, sizeof(codes)) == 8) {
+    digitalWrite(enable[index], LOW);
+    for (byte i = 0; i < 11; i++) {
+      values[index][i] = sensor.read();
+      Serial.print(values[index][i]);
+      Serial.print(" ");
+    }
+  }
+  Serial.println(" ");
+}
+
+

TEST/windDir/windDir.ino

@@ -0,0 +1,45 @@
+#include <SoftwareSerial.h>
+#include <Wire.h>
+#define RE 7
+#define DE 8
+ 
+const byte O2[] = {0x01 ,0x03 ,0x00 ,0x00 ,0x00 ,0x02 ,0xC4 ,0x0B};
+ 
+byte values[20];
+SoftwareSerial mod(10, 11); // RO / DI
+ 
+void setup() {
+Serial.begin(4800);
+mod.begin(4800);
+pinMode(RE, OUTPUT);
+pinMode(DE, OUTPUT);
+}
+ 
+void loop() {
+  int val1 = 0 ;
+  Calculate();
+  val1 = ((values[5]*256)+values[8]);
+  Serial.print("v: ");
+  Serial.println(val1);
+
+  delay(1000);
+}
+
+ 
+byte Calculate() {
+digitalWrite(DE, HIGH);
+digitalWrite(RE, HIGH);
+delay(10);
+if (mod.write(O2, sizeof(O2)) == 8) {
+digitalWrite(DE, LOW);
+digitalWrite(RE, LOW);
+for (byte i = 0; i < 11; i++) {
+//Serial.print(mod.read(),HEX);
+values[i] = mod.read();
+//Serial.print(values[i], HEX);
+//Serial.print(" ");
+}
+Serial.println();
+}
+return values[6];
+}

TEST/windSpeed/windSpeed.ino

@@ -0,0 +1,46 @@
+#include <SoftwareSerial.h>
+#include <Wire.h>
+#define RE 7
+#define DE 8
+ 
+const byte O2[] = {0x01 ,0x03 ,0x00 ,0x00 ,0x00 ,0x02 ,0xC4 ,0x0B};
+ 
+byte values[20];
+SoftwareSerial mod(10, 11); // RO / DI
+ 
+void setup() {
+Serial.begin(4800);
+mod.begin(4800);
+pinMode(RE, OUTPUT);
+pinMode(DE, OUTPUT);
+}
+ 
+void loop() {
+int val1 = 0 ;
+Calculate();
+//val1 = ((values[5]*256)+values[8]);
+val1 = (values[4]);
+Serial.print("v: ");
+Serial.println(val1);
+
+
+delay(1000);
+}
+ 
+byte Calculate() {
+  digitalWrite(DE, HIGH);
+  digitalWrite(RE, HIGH);
+  delay(10);
+  if (mod.write(O2, sizeof(O2)) == 8) {
+    digitalWrite(DE, LOW);
+    digitalWrite(RE, LOW);
+    for (byte i = 0; i < 11; i++) {
+      //Serial.print(mod.read(),HEX);
+      values[i] = mod.read();
+      //Serial.print(values[i]);
+      //Serial.print(" ");
+    }
+    Serial.println();
+  }
+  //return values[6];
+}